Mindray A3 Anesthesia Machine

Mindray anesthesia system A3 ™ combine traditional simplicity With advanced technology. Anesthesia professionals today demand ways to deliver intuitive technology That Can Provide Better patient care. With a key focus on ventilation modes, a screen Easier to see, touch screen control and by removing menus, buttons and trim dedicated buttons, the A3 Promotes the mere use of Its key features ventilation. Experience the convergence of value and performance.

  • Volume Control Ventilation (VCV)
  • Pressure Control Ventilation (PCV)
  • Pressure support ventilation (PS)
  • Intermittent synchronized
  • With Mandatory Ventilation Volume Control (SIMVVC)
  • Mode manual / spontaneous breathing respiratory monitoring capacity
  • User Interface Touch Screen 15 “
  • The breathing system is maintained About 35 ° C and virtually Eliminates internal condensation
  • Auxiliary flowmeters oxygen / air mixed gas supplied
  • Automatic compliance and fresh gas compensation keep accurate tidal volumes with a wide range of fresh gas flows and breathing circuits
  • Economic absorb single vessel you reduce the compressible volume and Accepts the absorbent filler rewrapping and nonproprietary
  • Cover Lighting with adjustable brightness
  • Individual wheel brakes on all four wheels
  • Available With optional patient monitor DPM (shown)
Categories: , Tags: ,

Description

Dimensions

  • (40 cm) H, 41.3 inches (105 cm) length W, 31.7 inches (80.5 cm) diameter
  • Weight (without vaporizers, gas cylinders): 331 lbs (150 kg)
  • Weight limit of the upper platform 88 pounds (40 kg)
  • Width: 24.2 in (61.6 cm)
  • Top Shelf Depth: 4.2 in (36.2 cm)
  • Sureface work Dimensions: 33.4in (85 cm) H, 24.2 inch (61.6 cm) W, 15in (38 cm) D
  • Drawer dimensions: 5.3 inches (13.5 cm) H, 17.3 inches (44 cm) wide, 15.1 inches (38.5 cm) diameter
  • Wheels (dual wheel) diameter: 6 inches (15 cm)

Power

Power and battery backup

  • Main power supply: 1000-0120 VAC 50/60 Hz
  • Input Current: 12A Total maximum
  • Power consumption: Approx. 200 VA
  • Power Cable: Cable Line

Battery Backup

  • Time: Up to approx. 150 minutes with two batteries
  • Charging time Battery backup: 8 hours max.
  • Auxiliary Outputs Number and Type Three output breaker (3A each)

pneumatic specifications

Gas supply requirements Pipline

  • O2: 40 psi – 87 psi (280-600 kPa)
  • N20: 40 psi – 87 psi (280-600 kPa)
  • Air: 40 psi – 87 psi (280-600 kPa)

general

  • Protections Cable / Hose Incorporated
  • Central Sleep: controls all four wheels
  • Compatible GCX mounting rails 5 Total rails
  • Connectors gas supply pipe: diameter indexed (DISS) threaded body ACCORDING CGA V-5
  • Requirements gas supply cylinder: Compatibility Cylinder E (O 2, N 2 O, Air)

Related products